Computer Networks — Test 22

Correct Answer: D. D. Hello protocol
Explanation: Hello protocol is used to discover neighboring routers automatically. It makes sure that the communication between neighbors is bidirectional. It’s similar to the real world moral construct of saying “Hello” to initialize the communication.

Correct Answer: C. C. Link-state response
Explanation: The five types of OSPF packets are: Hello, Database description, Link-state request, Link-state update, and Link-state ACK. There is no Link-state response packet; the neighbor router sends a Link-state update packet as a response to the Link-state request packet if there is an update in the routing table.

Correct Answer: B. B. I-iii-ii
Explanation: OSPF first implements a hello protocol. Then it later on tries to establish synchronisation with database. Later on building of routing tables is done.

Correct Answer: D. D. Checksum
Explanation: Checksum field is used to detect errors. It makes sure that the data portions that are being sent are all in integrity. It can detect duplicated bits. Once an error is detected, the sender has to re-transmit the data as it won’t receive an acknowledgement.

Correct Answer: A. A. 1
Explanation: The “M” bit is the more bit, which indicates that there are more packets to be received in the descriptor packet flow whenever it is set to 1. There is also an “I” bit which indicates if the packet is first in the flow.

Correct Answer: B. B. Ms
Explanation: The MS bit is used to indicate if the origin of the packet is a master or a slave. If it is set to 1, the source of the packet is a master, and if it is set to 0, the source of the packet is a slave.

Correct Answer: C. C. Database descriptor sequence number
Explanation: Sequence number field is used to detect a missing packet. The packets are to be received in order of the sequence number, so if the receiver detects that there is a sequence number skipped or missing in the order, it stops processing the further received packets and informs the sender to retransmit the packets in sequence.

Correct Answer: B. B. Packet filter
Explanation: As you know, firewalls are available as hardware appliances, as software-only, or a combination of the two. In every case, the purpose of a firewall is to isolate your trusted internal network (or your personal PC) from the dangers of unknown resources on the Internet and other network connections that may be harmful. The firewall prevents unauthorized access to your internal, trusted network from outside threats.

Correct Answer: A. A. State full firewall and stateless firewall
Explanation: Most network layer firewalls can operate as stateful or stateless firewalls, creating two subcategories of the standard network layer firewall. Stateful firewalls have the advantage of being able to track packets over a period of time for greater analysis and accuracy — but they require more memory and operate more slowly. Stateless firewalls do not analyze past traffic and can be useful for systems where speed is more important than security, or for systems that have very specific and limited needs. For example, a computer that only needs to connect to a particular backup server does not need the extra security of a stateful firewall.

Correct Answer: A. A. Chock point
Explanation: A firewall can be a PC, a router, a midrange, a mainframe, a UNIX workstation, or a combination of these that determines which information or services can be accessed from the outside and who is permitted to use the information and services from outside. Generally, a firewall is installed at the point where the secure internal network and untrusted external network meet, which is also known as a chokepoint.